Screwdrivers

80 in-lbs of maximum torque output provides for a superior power to weight ratio in a variety of fastening applicationsAdjustable two-position handle allows for operation as both in-line and pistol-gripVariable speed and reversing trigger switch provides 0-500 rpm for fastening and pre-drilling into wood, plastic, and light-gauge metalIndustrial quick-release hex-shank chuck allows for quick screwdriver bit change and prevents bit run out Electric brake provides increased productivity7.2V battery pack allows for longer run-time and charges in one hour Heavy-duty metal hinge provides secure and sustained two-position lock.

-Two speed 400 RPM & 200 RPM, 2.4V-Reversing, 6 position adjustable clutch. 3.5-26 in-lbs of torque-Adjustable swivel handle for tight applications-12V automotive charger optional

The Milwaukee 0490-22 is a 4V Lithium-Ion Screwdriver with 2 Batteries. The screwdriver accommodates tight spaces and awkward angles. The unit has a two-position handle in pistol and in-line settings along with a heavy-duty two-speed gearbox that delivers up to 600 RPM. The unit weighs just over a pound and has a built-in battery life display.

The DeWalt DW920K-2 is a Factory Reconditioned 1/4 inch 7.2V Cordless Screwdriver Kit. A two-position handle allows to adjust the tools configuration as needed to work in confined areas. The 7.2V motor which turns at 0-500 RPM and delivers 80 in-lbs of torque helps to finish the job easier and faster. The clutch setting can be adjusted to 16 different positions which help to eliminate the problem of stripping out of screws. Also, changing the bit is simple with an industrial quick-release keyless chuck.

The DeWalt DC520KA is a Factory Reconditioned Heavy-Duty 18V Cordless Drywall/Deck Screwdriver Kit. It features dual speed ranges 0-900/0-2900 RPM, high speed for drywall, low speed for decking applications. The depth sensitive set and forget nosepiece is for consistent fastener depth. The fan cooled motor provides additional power and durability.

Designed for a wide variety of screw fastening applications. The DS202-14V drives 1" - 2" screws and is designed with a reverse switch to back out driven screws.

The DeWalt DW920K-2 is a 7.2V Cordless Screwdriver Kit. A two-position handle allows adjusting the tools configuration as needed to work in confined areas. The 7.2V motor which turns at 0-500 RPM and delivers 80 in-lbs of torque helps to finish the job easier and faster. The clutch setting can be adjusted to 16 different positions which help to eliminate the problem of stripping out of screws. Also, changing the bit is simple with an industrial quick-release keyless chuck.

The Milwaukee 6546-6 is a 2.4V 2-Speed Cordless Screwdriver Kit. The cordless 2.4V screwdriver has a 6 position adjustable clutch and two speed ranges, 0-200 RPM and 0-400 RPM. With both forward and reverse this lightweight, 14 ounce, screwdriver is ideal for electricians, installers, assembly line workers, auto mechanics and general home maintenance. The tool has a two-position handle for comfort and convenience in tight locations and is compact enough to fit into a pocket or contractor belt pouch.

Ideal product for controlled depth fasteningPowerful 6.5 amp motor, 0 to 2500 RPM, variable speed controlControl the depth of every screw with the no slip depth guideRamp-off depth locator for easy depth adjustmentsAll metal gear case and diaphragm10 ft. 2-wire rubber cordErgonomic tactile grip and two finger trigger for user comfort and balanceRemovable belt clip with bit storageIncludes Screwdriver, 5/16 hex socket driver, belt clip, and depth locator assembly

At 0-4000 RPM you can drive drywall screws as fast as your arm can move and have all the control you need for framing with the smooth activating trigger speed control Powerful 6.5 amp motor, 0 to 4000 RPM, variable speed control Ramp-off depth locator for easy depth adjustments All metal gear case and diaphragm 10 ft. 2-wire rubber cord Ergonomic tactile grip and two finger trigger for user comfort and balance Removable belt clip with bit storage Includes Screwdriver, belt clip, #2 drywall bit tip, magnetic bit tip holder, and depth locator assembly

The DeWalt DW255 is a Factory Reconditioned Heavy-Duty Variable Speed Reversible Drywall Screwdriver. The DW255 is a high-speed screwdriver designed for the residential dry waller who demands productivity and speed. Powered by a 6 Amp motor that turns at 0 to 5300 RPM. The DW255 can also frame steel studs up to 20 gauge. The tool weighs 2.9 lbs and incorporates ergonomic features such as finger grooves, a two-finger rubber trigger, and a set and forget nose cone for getting into tight spaces. The users can also reattach the cone without changing the setting.

The DW272 factory reconditioned screwdriver features a powerful 6.3 Amp motor and weighs in at a light 3.1 lbs With helical-cut steel, heat-treated gears and a metal gear housing, the DW272 is engineered to excel in the most demanding applications. The set and forget nosepiece ensures consistent results, while the external clutches facilitate easy replacement for maximum tool life. The unit also features soft-grip handles, two-finger trigger and integrated belt hook.

Senco DS200 is a Feed System. For corded power and speed in various drywall and wood screw applications, the SENCO DuraSpin DS200 Screwdriver Attachment is the ultimate screw-driving companion to SENCO, DeWalt, Milwaukee and Makita electric screwdrivers. The DS200 collated screwdriver attachment drives screws ranging from 1 2 (25 mm 50 mm) in length.

The powerful, versatile DS200-AC screwdriver makes easy work of tough jobs. Professional remodelers, contractors and DIYers will appreciate the convenience of the 3,300 rpm collated screw system, which increases productivity by eliminating the need for handling loose screws. The DS200-AC has corded power to drive 1 2 screws into even the toughest work surfaces.

Senco SG2500 is a Drywall/Framing Screwdriver. This rugged DuraSpin screwdriver is the ideal tool for users who require power, speed and versatility. The SG2500 tool features a high-torque, variable-speed reversing motor to tackle tough drywall and wood screw applications.

Includes 20" removable universal extension for fastening while standingSteel feed mechanism for durabilityHandle #6 to #12 screws 1" to 3" in length with a single nose pieceReversible screw belt feeds from either endOpen nose for precise placement of screwsOne-piece bit is stronger, more convenient that mandrel designsKeyless bit changes fast, positive and preciseUnique, simple system provides the most consistent countersink in the industryFast, precise and repeatable depth control. Simply rotate convenient adjusting ring, each click changes depth 1/64"Tool can be used as a conventional power screwdriver without the feed mechanismFast, convenient and versatile

The Makita 6825 is a Factory Reconditioned Variable Speed Reversible Drywall Screwdriver. The Rocket operates between 0-6000 RPM, 50% faster than most screwguns, which max out at 4000 RPM. The new screwgun features a 6.5 Amp motor with plenty of torque. Sealed ball-bearing construction ensures that the gun runs smoothly at higher speeds, without harm from drywall dust. The tools larger trigger also incorporates a sealed switch that protects it from dust.

For roofing systems not furnished by MilwaukeePower and gearing for self drilling fasteners10 ft. fixed cord120V AC, 6.5 amps, 0-2500 RPMFeatures Double insulated, trigger switch, trigger lock on, soft grip handle, snap-action clutch, 0.92 spindle offset

The DeWalt DW257 Factory Reconditioned Heavy Duty Deck/Drywall Screwdriver flushes 1-1/4 and 1-5/8 backerboard screws to the surface quickly and easily. The DeWalt DW257 is very well balanced and light weight, has a comfortable pistol grip and delivers 132 in-lbs of torque. The tool easily drives 3 screws all the way in heavy lumber without the worry of stopping short. The maximum fastener size driven by the tool is #12. The large variable speed reversing trigger switch and the trigger lock location prevent unintentional locking of the trigger in the on position while using the Deck/Drywall Screwdriver. Featuring 6.2 Amp motor the heavy-duty screwdriver functions at 0 to 2500 RPM. This makes it a very versatile tool that can handle a wide range of applications like building decks, sub-flooring, installing of ceilings, paneling or partitions, exterior construction, installation of galvanized iron sheet or corrugated sheet roofing, drywall and other fastening tasks. The helical-cut steel, heat-treated gears ensure durability of this heavy-duty tool. The DeWalt DW257 has a metal tipped adjustment collar that locks securely to the clutch housing and never accidentally pops off while using the tool. The two-finger rubber trigger is part of the overall ergonomic design that makes the Deck/Drywall Screwdriver comfortable during long hours of use.