Hammer Drills

The DeWalt DC984B is a 1/2 inch 14.4V Heavy-Duty XRP Cordless Hammerdrill/Drill/Driver - Tool Only. It uses a DeWalt built high-torque, high efficiency motor to deliver 450 in-lbs of torque for drilling large diameter holes and driving large screws. The XRP drill comes equipped with a patented 3-speed transmission. The 3-speed option allows the drill to be set at the optimum speed range for the application being performed to maximize performance. The DC984 has a maximum speed of 1800 RPM which is 29% faster than high speed. The Cordless Hammerdrill/Drill/Driver also has a maximum BPM speed of 30600 BPM which allows for high performance drilling in masonry applications.

The DeWalt DC935KA is a Factory Reconditioned 14.4V Heavy-Duty XRP 1/2 inch Cordless Hammerdrill/Drill/Driver Kit. with a high power, high efficiency motor to deliver 335 unit watts out of power for maximum performance in all drilling and fastening applications. The DC935KA XRP drill comes equipped with a patented 3-speed transmission. which allows the drill to be set to match the speed to the application for optimal performance. The DeWalt DC935KA drill/driver features an exclusive 1/2 inch axial locking chuck where the sleeve locks to prevent bits from slipping and falling out. The DC935KA is powered by an XRP extended run-time battery that gives the drill long run-time and battery life. This reconditioned DC935KA cordless drill offers superior ergonomics providing optimal balance, size and weight.

The factory reconditioned DeWalt DC926KA Cordless Hammer Drill symbolizes ergonomic perfection between balance, size and weight. This cordless power drill has a highly efficient motor that delivers 480 unit watts out of max power, and is housed in a remarkably lightweight (6 lbs.) body. The unique 3-speed transmission system of this reconditioned cordless drill, along with 22 clutch settings, gives its user full control over the tool and makes it versatile for different drilling and fastening applications.The heavy-duty

The Hitachi DV18DCL is a 1/2-Inch 18-Volt Lithium-Ion Hammer Drill. The Hitachi DV18DCL delivers a maximum torque of 380 in/lbs and has a 2-speed transmission with variable speed ranges from 0-400 in low and 0-1,500 in high. The hammer drill impact rate is 0-21,000bpm for even the toughest applications. A 22 stage slip clutch helps with all varies jobs along with tools balance.

Powered by an 18V XRP battery that is designed to perform 40% more than standard batteries, the DeWalt DC925KA factory reconditioned cordless hammerdrill/driver offers exceptional value. The power-packed motor of the DC925KA delivers maximum power of 480 unit watts out for all drilling, driving and fastening applications. The three-speed drilling transmission (0-450 RPM, 0-1,500 RPM, and 0-2,000 RPM) enables the user to easily drill 5/8 holes in 1/2 and 2/4 wafer boards or drill in otherwise tough to drill materials.The 3 speed options (0-7,650 BPM, 0-25,500 BPM, and 0-34,000 BPM) allow the DeWalt DC925KA to accomplish a variety of jobs including the tough job of making small holes. The

The DeWalt DC988 is a 18V 1/2 inch Heavy-Duty XRP Cordless Hammerdrill/Drill/Driver - Tool Only. The DeWalt built motor delivers 500 in-lbs of maximum torque. An exclusive 3-speed all metal transmission features a MAX 3rd Speed at 0-2000 RPM which is 38% faster than high speed. The hammer drill mode delivers 34000 BPM in MAX 3rd Speed drilling faster holes in masonry. The tool features an 1/2 inch ratcheting chuck lock with carbide jaws which prevent bits from slipping.

The DeWalt DC925K is an 18V Hammer Drill/Driver Tool Only with Case. It has a powerful 18V combination tool for heavy-duty hammerdrilling and screwdriving applications. There are three speed settings for optimum performance in high torque, normal use and high speed applications. In addition, the 22-position adjustable torque control allows for uniform results and optimized precision when screwdriving. You get superior bit-gripping strength with the 13 mm self-tightening chuck, which tightens throughout operation. You also get better control of the tool because of an electronic brake and the modular design,w hich gives you easy access to key components and serviceability. The high-performance fan-cooled motor is built for maximum power and durability with replaceable brushes. An all-around great tool with all the features youll need to get the job done right.

The 1/2" factory reconditioned Makita BHP451 is an 18V hammer-drill-driver kit built-in with LXT lithium-ion batteries, which double the battery life and provides 5x lower self-discharge. The tool features "Active 3" Control and a 45-minute Optimum charger that help in current, thermal, and voltage control. It is easy to switch your application from hammer drill to driver with just one touch - thanks to Shift-Lock technique. The 4-pole high torque motor delivers a maximum output of 560in-lbs.To optimize the efficiency by 25%, Makita BHP451 has an integrated 3-speed transmission. This feature of the Makita drill also adds to the versatility of the drill and all of these features are integrated in a compact body measuring just 9-7/8" in length, while weighing as light as 4.9lbs. The shape and the design of the cordless tool reduce the fatigue, even under pressure. Maintenance is easier as well, with the externally accessible brushes. The entire kit also includes two LED lights with the tool for accurate working in low light conditions.

The DeWalt DC925 is a Factory Reconditioned 18V Hammer Drill/Driver Tool Only. It is a powerful combination tool for heavy-duty hammerdrilling and screwdriving applications. There are three speed settings for optimum performance in high torque, normal use and high speed applications. In addition, the 22-position adjustable torque control allows for uniform results and optimized precision when screwdriving. You get superior bit-gripping strength with the 13 mm self-tightening chuck, which tightens throughout operation. You also get better control of the tool because of an electronic brake and the modular design, which gives you easy access to key components and serviceability. The high-performance fan-cooled motor is built for maximum power and durability with replaceable brushes. An all-around great tool with all the features youll need to get the job done right.

The DC927 is a 18V hammer drill/driver with NANO Technology- Tool Only. It is powered by a combination of a high-efficiency DeWalt-built motor and exclusive 18V nano-phosphate lithium ion battery. The combination delivers 425 UWO of maximum power and the runtime of 18V, but at 5.5 lbs weighs almost a pound less than traditional 18V hammer drills. The DC927 comes equipped with a patented 3-speed, all-metal transmission that helps to match the tools speed to the application. It also features an exclusive 1/2 inch, self-tightening chuck that tightens during work, for impressive bit-gripping torque reducing bit slippage or fall out. The hammer drills superior ergonomics are styled to optimize performance with balance, size and weight. The hammer drill/driver has three speed settings 0-450 RPM, 0-1500 RPM and 0-1800 RPM and it allows for three hammer drilling speeds, too 0-7650 BPM, 0-25500 BPM and 0-30600 BPM. It also offers 22 clutch settings for increased control in fastening applications.

The Milwaukee 0824-24 V18

The DeWalt Factory Reconditioned DC212KA is a Heavy-Duty 18V Cordless 7/8" SDS Hammer. The SDS hammer features electro-pneumatic hammer mechanism for fast penetration and low vibration. Its compact L-Shape design allows access in tight spaces while providing optimal balance for the user. The hammer has 360 side handle for better control and ease of use in tight spaces. Its shocks has active vibration control which significantly reduces vibration and increases user comfort and productivity.

The DeWalt DC925B is an 18V Cordless Hammerdrill/Drill/Driver Tool Only. It has DeWalt built high power, high efficiency motor which delivers 510 unit watts out of power for maximum performance in all drilling and fastening applications. Its XRP extended run-time batteries provide long run-time & battery life (Batteries not Included). Patented 3-speed all-metal transmission matches the speed to the application for optimal performance. Heavy-duty 1/2 inch self-tightening chuck tightens throughout operation providing superior bit gripping torque. It has superior ergonomics optimize balance, size and weight.

The Makita Reconditioned BHR240Z is an 18-Volt LXT Lithium-Ion SDS-Plus Rotary Hammer Tool Only. It has 3-mode switch for rotation only, hammering with rotation or hammering only. The Makita BHR240Z features 2x faster drilling with synchronized RPM and BPM for more efficient drilling. The built-in torque limiter clutch disengages if bit jams when hitting rebar. The chisel rotates 360 with 40 different positions to get the best working. The The Makita BHR240Zs LXT Lithium-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power).Batteries and Charger are NOT Included.

The Makita BTP140Z is a 18V LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill Kit Tool Only. The Makita BTP140Z hybrid 4-function tool drives lag bolts, drills into concrete, drives screws with clutch settings and drills into wood, metal and plastic. The Makita built, 4-pole maximum torque motor delivers 1240 in-lbs of efficient torque in a compact size. The Makita BTP140Zs LXT Lithium-Ion battery provides longer run time, 5x lower self-discharge is for use any time and 16 firm holding contact terminals are for constant high power.

The DC927KL is a 18V hammer drill/driver with NANO Technology. It is powered by a combination of a high-efficiency DEWALT-built motor and exclusive 18V nano-phosphate lithium ion battery. The combination delivers 425 UWO of maximum power and the runtime of 18V, but at 5.5 lbs weighs almost a pound less than traditional 18V hammer drills. The DC927KL comes equipped with a patented 3-speed, all-metal transmission that helps to match the tools speed to the application. It also features an exclusive 1/2 inch, self-tightening chuck that tightens during work, for impressive bit-gripping torque reducing bit slippage or fall out. The hammer drills superior ergonomics are styled to optimize performance with balance, size and weight. The hammer drill/driver has three speed settings 0-450 RPM, 0-1500 RPM and 0-1800 RPM and it allows for three hammer drilling speeds, too 0-7650 BPM, 0-25500 BPM and 0-30600 BPM. It also offers 22 clutch settings for increased control in fastening applications.

DEWALT built high torque motor delivers 500 in.-lbs. of maximum torqueXRP

The Milwaukee 0627-84E is a Factory Reconditioned 18-Volt 1/2-Inch Cordless Hammer Drill Kit. The rugged Lok-Tor series drill delivers high torque, long run-time and the increased durability and quality. It features an exclusive all-metal, single-sleeve ratcheting chuck with carbide jaws to provide high grip torque on bits. A new Milwaukee-built high efficiency motor delivers up to 495 in-lbs of torque. The high efficiency motor and superior battery technology combine to provide the ultimate run-time.We at Tool King are excited to present this kit for the first time with a 220V European charger for our international customers.

The DeWalt DC988KA is a Factory Reconditioned 18V 1/2 inch Heavy-Duty XRP Cordless Hammerdrill/Drill Kit . It uses a DeWalt built high-torque, high efficiency motor to deliver 500 in-lbs of torque for drilling large diameter holes and driving large screws. The XRP drill comes equipped with a patented 3-speed transmission. The 3-speed option allows the drill to be set at the optimum speed range to maximize performance. The DC988 has a maximum speed of 2000 RPM which is 38% faster than high speed. This unit has a maximum BPM speed of 34000 BPM which allows for high performance drilling in masonry applications.

The DeWalt DC910B is a Cordless 1/2-Inch 28-Volt Hammerdrill/Drill/Driver With NANO Technology. With the power of 28 Volts the DC310BK is light enough for all day use and has enough power to handle any work site job. With the standard features expected from DeWalt

The DeWalt DC233KL is a Heavy-Duty 36V Cordless 1 inch SDS Rotary Hammer Kit With NANO Technology. It features SHOCKS- Active Vibration Control which significantly reduces vibration and increases user comfort and productivity. The compact L-shape design allows access in tight spaces while providing optimal balance to the user. The 2.0 ft-lbs impact energy provides corded power without the cord. DeWalt built high torque; high efficiency motor delivers maximum performance in all drilling applications.

The Milwaukee 0724 is a 28V 1/2 Cordless Hammer-Drill. It uses the Milwaukee built high power motor to develop an 600 in-lbs of maximum torque and 0-600 RPM, 0-1800 RPM, ideal for drilling larger holes and driving larger screws faster. The 28V battery pack weighs less than an 18 Volt pack and yet delivers twice the run-time. The 0724 comes standard with a 1/2 all-metal, single-sleeve, ratcheting chuck with all carbide jaws that keeps bits from falling out and drill bits from slipping. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. The 0724 also comes standard with the patented Clip-Lok System. The Clip-Lok System keeps the drill within arms length at all times. The Clip-Lok System also features an on-board bit holder which holds up to two standard Phillips bits.

-Up to 2x Run-time of 18v tools-Lightweight - 28V Power with 18v battery weight-28V High power reversiable motor (screw removal; bit jams)-Keyless chuck for fast, easy accessory and adapter changes-Tri-mode - Hammer drilling, chiseling and drilling modes-Durable metal gearbox for long life-Soft grip handle and two-finger trigger for optimal operator comfort-Compact L-Shape handle design for maximum comfort and control, better access to tight spaces-Battery Fuel Gauge - Displays remaining run-rime

-Milwaukee 0724 Cordless 28 Volt 1/2 inch Hammer-Drill uses the Milwaukee built high power motor to develop an enormous 600 in/ lbs of maximum torque and 0-600/0-1800 rpm, ideal for drilling larger holes and driving larger screws faster! Powering the 0724 is the revolutionary 28 Volt Lithium-Ion battery pack exclusively from Milwaukee. The 28 Volt battery pack weighs less than an 18 Volt pack yet delivers two times the run-time, making this the ideal solution for all drilling and driving needs! Only the Milwaukee battery can be inserted in the reverse position which allows for the ultimate balance when working overhead or in hard to reach areas. The 0724 comes standard with a 1/2 inch all-metal, single-sleeve, ratcheting chuck with all carbide jaws that keeps bits from falling out and drill bits from slipping! This is the industrys tightest gripping chuck and comes standard only on the 0724. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. The 0724 also comes standard with the patented Clip-Lok System. The Clip-Lok System attaches securely to the operators belt or tool bags and easily releases with one hand, ideal when working from a ladder or when there is nowhere to place the tool when adjusting or positioning a work piece. The Clip-Lok System keeps the drill within arms length at all times. The Clip-Lok System also features an on-board bit holder which holds up to two standard Phillips bits. Tool only (no battery or charger) Clip-Lok System Side Handle No. 2 Phillips Bit

Milwaukee 0756-22 is a 1 inch 28V Compact SDS Rotary Hammer Kit. This is a powerful, compact design, lightweight and extremely versatile tool. Powered by a V28 Lithium-Ion Battery, the 0756 delivers maximum run time and true corded power in a cordless rotary hammer. With three operating modes it can easily be switched from rotary hammer to rotation only (drill) to hammer only (chipping). The 0756 delivers 2.1 ft-lbs of impact energy and 4700 BPM at up to 1400 RPM for fast drilling and powerful chipping. The optimal drilling range in concrete is from 3/16 inch to 3/4 inch with a 1 inch solid bit capacity and 2-1/2 inch thin wall core bit capacity.

Hitachis H45MRY Demolition Hammer with UVP (User Vibration Protection) is the first in its class with a dedicated anti-vibration mechanism. This UVP system combines counterweights and dampers to reduce vibration by over 50% and increase tool life by 30%. The H45MRY has an Impact Energy rating of 9.4 Ft-Lbs. The combination of less vibration, well-designed comfort features, and optimized striking performance adds up to unmatched productivity from the H45MRY.

The Makita Factory Reconditioned HM1810 is a heavy duty 64LB AVT Breaker Hammer. With a powerful 15 AMP motor and efficient 1,100 BPM this breaker hammer is capable of completeing the most demanding jobs.

The Makita HM1304B is a Factory Reconditioned 35 lbs Demolition Hammer. The tool is equipped with a powerful 13.0 Amp motor; efficient 1450 BPM providing world class performance. 35 lbs for both horizontal and vertical applications.

Powerful 13-amp motor for maximum performanceSlide on/off switch for easy operationComfortable D-shaped grip side handle absorbs vibration; adjusts to 8 different positions forward and backElectronic variable speed control (950-1900 BPM) for matching the hammering speed to the jobService reminder light indicates when to replace carbon brushesOne touch sliding chuck for easy bit installation and removal12 angle settings of bit

The Makita HM1211B is a Factory Reconditioned 20-pound AC/DC 3/4 Hex Demolition Hammer with Case. The tool has an air cushion design for powerful performance.

DeWalt D25940KR is a factory reconditioned demolition hammer kit is very durable, comfortable and easy to use. It is powered by a 15 Amp motor for longer life. The 26 lbs hammer is the most durable hammer in its class, lasting up to 25 % longer than the nearest competitor. Armed with features as spring-loaded dust seals and non-air pumping beat piece, the hammer will stand up to the toughest job site. It produces 1620 BPM with 22 ft-lbs of impact energy. The active vibration control (AVC), produces the lowest amount of vibration in its class. Due to the compact inline design, it can be used in horizontal or vertical applications and the large rear handle has enough room to use one or two hands. The chisel can be quickly adjusted 360 in a one-step process. The lock-on/off rocker switch can be easily operated with one finger.

-7.8 Amp motor provides high performance and overload protection-High/low speed for high speed drilling or high torque applications-Dual mode hammer drill/drill for wood, steel or masonry applications-Lightweight design for less user fatigue-Two-finger trigger for increased comfort-360 side handle with depth rod offers greater control, versatility and increased depth accuracy-Variable speed allows for precise hole placement on work surface

DeWalt DW515K Factory Reconditioned Heavy-Duty 1/2" Variable Speed Reversible Dual Range Hammer Drill. The DW515K 1/2" Hammer drill provides all the power, comfort and durability needed for the most demanding applications. The dual mode hammerdrill/drill provides versatility for wood, steel or masonry jobs and can be used at high speed for drilling or low speed for high-torque applications. The tool is equipped with a powerful 8.2 Amp motor for greater overload protection and a built-in clutch to prevent gear damage in lock-up situations. The ergonomic features including the rubber grip handles, variable-speed, two-finger, rubber trigger and light tool weight (5.5 lbs) for increased comfort and control. The tool runs 0-1050/0-2400 RPM and 0-18000/0-41000 BPM. It includes side handle, chuck key and holder, depth rod and kit box.

8.2 Amp motor provides high performance and overload protection.High/low gear for high speed drilling, or high toque applicationsDual mode hammerdrill/drill for wood, steel or masonry applicationRubber grip and two- finger trigger for increased comfort360 degree side handle with depth rod offers greater control, versatility, and increased depth accuracyLight weight design for less user fatigueVariable speed allows for precise hole placement on work surface

At 8.5 amps this heavy duty pistol grip 5387-20 Hammer-Drill can handle the toughest drilling of 3/4 inch holes in concrete. With dual range speed control, the operator can choose more power to speed for the toughest applications or more speed and less torque for lighter applications. Equipped with a metal gear case this tool can withstand the daily jobsite abuse. The removable side handle also assists in setting the depth rod for pre-set hole drilling. Use for drilling in wood with Flat Boring Bits, Hole Saws, Auger Bits, and Selfeed Bits (sold separately). It can also be used to drill in steel with Twist Bits and in concrete with Percussion Bits (both sold separately).

The Bosch 11224VS is a 7/8 inch SDS-plus bulldog rotary hammer has a 6.9 Amp motor delivers 0 to 1100 RPM and 0 to 6150 BPM of concrete pounding power. The D-handle design and lightweight body give extra control, especially in overhead applications. Vario-lock positioning allows users to rotate and lock chisel into 36 different positions for the optimum work angle. The drill operates in hammer only, drill only and hammer with rotation modes for versatility.

The DeWalt D25113K is a Factory Reconditioned Heavy-Duty 1 inch SDS Pistol Grip 3 Mode Hammer. It features 2.5 ft-lbs of impact energy that provides for fast drilling and powerful chipping. The unit has an 8.0 Amp motor that provides high performance and overload protection. The rotary hammer has a capacity to cover a broad range of mechanical and epoxy anchoring applications. The optimal range for the hammer in concrete is 5/32 inch - 5/8 inch. The reverse feature assists in the removal of fasteners. The tools variable speed is used for precise hole placement on work surface. The tool comes with a factory set clutch which reduces sudden, high torque reactions if the bit jams. The 360 side handle adjusts easily for preference or use in tight spaces.

-2.3 ft-lbs of impact energy provides fast drilling and powerful chipping-7.5 Amp motor provides high performance and overload protection-Reverse feature assists in the removal of fasteners-Variable speed allows for precise hole placement on work surface-Factory set clutch reduces sudden, high torque reactions if bit jams-360 side handle adjusts easily for preference or use in tight spaces

-2.3 ft-lbs of impact energy provides fast drilling and powerful chipping-7.5 Amp motor provides high performance and overload protection-Reverse feature assists in the removal of fasteners-Variable speed allows for precise hole placement on work surface-Factory set clutch reduces sudden, high torque reactions if bit jams-360 side handle adjusts easily for preference or use in tight spaces-Use chipping mode for light chipping applications Use rotation only mode for wood & metal drilling

The DeWalt D25201K hammer has a heavy duty 7.5 Amp motor with dust sealed ball bearings, 2 ft-lbs of impact energy and rubber molded handle for enhanced comfort. It's single mode operation has less moving parts for enhanced durability. The hammer is ideal for hole sizes 3/16-Inch to 7/8-Inch in concrete. It includes side handle, depth rod and kit box.

Double Insulated construction with 2 wire cord. 1-1/8 in. solid bit capacity, 3-1/2 in. thin wall core bit capacity in concrete or 4 in. capacity in masonry block. Bit protect the mechanism from overload. Variable speed 0-980 rpm, 0-4,200 bpm, 2.5 ft./lbs. blow energy Powerful 7.4 amp motor provides power for a hard-hitting 2.5 ft.-lbs. of energy per blow. 10 ft. cord. Three modes of operation rotation with hammering, hammer-only and rotation-only. This versatile tool can be used for drilling in steel, wood or concrete. Use rotation-only for drilling in steel and wood with optional chuck and adapter. Use rotation with hammering when drilling in concrete. Use hammer-only for light chipping work. Speed control switch allows operator controlled starts for less bit walk resulting in more accurate hole positioning. Lightweight, compact 14 in. length and well balanced design. Quick-change removable bit holder for optional 3-jaw chuck.

DeWalt D25600K factory reconditioned 1-3/4 SDS max rotary hammer kit. The factory reconditioned rotary hammer drill is ideal for drilling anchor fixing and through holes in concrete and masonry from 12 to 45 mm in diameter and core drilling up to 100 mm. It has a unique dust sealing protection to prevent even the finest dust ingress into the hammer mechanism delivering high durability and extended tool life. The ergonomic slim line design gives control and easy access to tight spaces. An electronic brush wear indicator identifies when brushes need replacing and tool requiring servicing.

Popularly used for drilling and chipping the DeWalt D25701K heavy-duty SDS max combination hammer kit features a 13 Amp motor and generates 11.7 ft-lbs of impact energy to drill up to 7/8 inch. The Complete Torque Control (CTC) feature of DeWalt D25701K is a boon for the users. Using the 2-stage clutch of this power tool, the CTC delivers maximum control to the user for comfortable usage in tight job site conditions.The SHOCKS active vibration control reduces the vibrations up to 70%, letting the user work with this tool for longer hours without straining the arms. This DeWalt tool's comfortable grip is assured while down drilling as this combination hammer is equipped with a rear handle mount. The lock-on switch, locks the position of the drill chipping, thus minimizing the manual effort of setting it. This minimizes the user fatigue to a great extent.The switch, brushes and the cord-set are easily accessible due to the modular design of the DeWalt D25701K. Weighing 17.5 lbs, and 20.5 inches in height the hammer is one heavy-duty hammer/driver that can easily ported to job site. This Factory reconditioned combination hammer kit ensures quality as it goes through multi-level quality checks.

Ideal for the toughest industrial job site, the DeWalt D25500K 1-9/16 SDS Max Rotary Hammer Kit features an 11 Amp motor with variable speed controller. This slotted drive shafts off this SDS max combination hammer accepts most of the tool bits that a user can possibly has. This widens the versatility of the tool to a great extent.With a speed range of 140 to 280 RPM and blowing capability of 1330 to 2660 BPM this heavy duty dewalt tool is apt for drilling with less effort at construction sites or the like. .73 to 7.3 ft-lbs of impact energy per blow make it a power drill, ideal for most of the heavy-duty job. The variable-speed/impact controller optimizes the performance of the drill as it lets you set the RPM or the BPM as per your requirement. The controller even ensures optimal power usage. The rubber grips reduce the effect of the vibrations and make this tool less strenuous to use even when used for long hours. The general strain of holding and using a power tool is further minimized by this driller's rear mount handle.Now you need to bend less when using the tool in down drilling condition. To ensure use safety, the factory clutch reduces the reaction of the tool if the bit locks up while in operation. The DeWalt D25500K drill set includes a 360 Side Handle that enables easy positioning of the tool as per the job site condition for convenient handling.

The Bosch 11240 is a Factory Reconditioned 1-9/16 inch 2-Mode SDS Max Combination Hammer. The hammer features a 10 Amp motor, dual-mode selector lever for hammering with or without rotation and Vario-Lock positioning that rotates and locks the chisel into 12 different positions. The SDS-Max system facilitates tool-free bit changes with automatic bit locking, dust protection and a maximum-impact energy transfer rate. The tool includes such extras as innovative service modules designed so a qualified service technician can quickly replace the brushes and cord, a 360 auxiliary handle and an integral clutch (to minimize torque reaction).

The Bosch 11245EVS is a Factory Reconditioned 2 inch 2-Mode SDS Max Combination Rotary Hammer. The Bosch 11245EVS rotary hammer features an SDS-Max drive system and its powerful 14 Amp motor provides unmatched drilling performance. The hammer includes two modes of operation hammer/rotation and hammer-only. The tools electro-pneumatic impact system maximizes impact force and minimizes vibration, while the 12-position Vario-Lock helps optimize the work angle. In addition, the hammers electronic feedback circuitry maintains maximum performance levels at all times. The ServiceMinder light indicates the need for service eight hours prior to tool shutdown, while the improved tool holder ensures advanced heat treatment and dust-seal protection for long life. It includes 360 auxiliary handle and case.

The DEWALT D25701K Heavy-Duty 1 7/8 SDS MAX Combination Hammer with complete Torque Control lets you easily chip and drill with 11.7 ft-lbs of impact energy. The powerful 14-pound tool features a modular design that makes for easy access to switch, brushes, and cord-set for easier and quicker service during long, continuous hours of use.The Complete Torque Control (CTC) of DEWALT combination hammer utilizes patented 2-stage clutch that provides maximum control in bind-up situations. The Active Vibration Control system named DEWALT SHOCKS reduces vibration by up to 70% thus ensuring less fatigue while working for long hours. The rear handle of the drill mount eases the process of drilling downward reducing the stress on your back while bending down for continuous periods. The DEWALT hammer has a unique lock-on switch that reduces user fatigue while chipping. This feature acts as a boon since you don't have to squeeze the trigger and hold the tool during extended use. The combination hammer operates on a powerful 13 Amp motor, which provides maximum overload protection and power for longer tool life.

The Makita HR2455X is a 1 inch 3-Mode D-handle SDS plus rotary hammer. The PITBULL from Makita has 3-Mode operation; Rotation Only, Hammering with Rotation, or Hammering Only. The chisel rotates 360 with 40 different locking positions and the rubberized D-Handle offers more comfort and control with reduced operator fatigue. The hammer features variable speed (0-1100 RPM) and reversible speed for complete drilling and hammering control.

The Bosch 11236VS is a factory reconditioned 1-1/8 inch 3-Mode SDS plus rotary hammer. The 7.5 Amps hammer runs on a variable-speed 0 to 850 RPM motor with 0 to 3900 BPM. The hammers Vario-Lock positioning enables the user to rotate and lock the chisel into 36 different positions to optimize the working angle. The unit features 3 operational modes for versatility hammer only, for light chipping applications with chisels; rotation only, for drilling wood, steel and building materials with optional chuck; and hammer/rotation, for drilling concrete, brick, stone and masonry. The tools maximum capacities are 1-1/8 inches in concrete, 1/2 inch in steel, 1-1/4 inches in woodland 4 inches in thin-wall core bit. It includes 360 auxiliary handle, depth gauge and carrying case.

The Makita HR2455X is a Factory Reconditioned 1-Inch 3-Mode D-handle SDS plus rotary hammer. The PITBULL from Makita has 3-Mode operation; Rotation Only, Hammering with Rotation, or Hammering Only. The chisel rotates 360 with 40 different locking positions and the rubberized D-Handle offers more comfort and control with reduced operator fatigue. The hammer features variable speed (0-1100 RPM) and reversible speed for complete drilling and hammering control.

The Bosch 11255VSR is a Factory Reconditioned Bulldog Xtreme 1 inch SDS-Plus D-Handle Rotary Hammer. The Vario-Lock positioning rotates and locks chisel into 36 different positions to optimize working angle. Its patented rotating brush plate provides equal power in forward and reverse and has patented cord turret 35 pivot for added flexibility and longer cord life. It features SDS-Plus bit system for tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate.

Powerful 6-amp motorSDS-plus tool holder Tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rateDual mode selector Easily converts from rotation only to rotary hammer modePatented rotating brush plate Provides equal power in reverse and extends brush lifePistol grip handle Compact ergonomic degisn with soft gripIntegral clutch helps minimize torque reactionVariable-speed reversing trigger for accurate bit starting, as well as removing fasteners or bound bits13-foot power cord For added user reach and convenience

The Bosch 11255VSR is a Bulldog Xtreme 1 inch SDS-Plus Rotary Hammer. The hammer features Vario-Lock positioning system which rotates and locks chisel into 36 different positions to optimize working angle. It has multi-function selector 3 modes of operation, rotation only, rotary hammer and hammer-only mode. Patented rotating brush plate provides equal power in forward and reverse.

The Fastest, Longest Lasting Breed of Rotary Hammer...The totally redesigned Bosch 11253VSR BULLDOG Xtreme outlasts the competition in both speed and performance!

The Ultimate Concrete Drilling Solution - 4.8 amps of power and 1.4 ft lbs of real impact energy provide fast, smooth drilling performance when drilling small diameter holes into concrete all day longLightweight, Compact Design - At 11.8" in length and 4.6 lbs in weight, the tool is perfect for drilling applications in hard to reach spaces or overheadSDS-Plus Bit System - Tool free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate2-Mode Selector - Easily converts from rotary hammer to rotation onlyIntegral Clutch - Helps minimize torque reactionVariable-Speed Trigger - For accurate bit starting, as well as removing fasteners or bound bits360 Auxiliary Handle with Built-In Quick Release Depth Gauge - Provides wide range of movement along with consistent drilling depthService Minder Brushes - Eliminates guesswork, stops the tool when preventative maintenance is required

Air cushion design for hard hitting and fast drillingPowerful 10 Amp motor for continuous heavy-duty workTorque limiting clutchEasy lever change from rotary hammering to hammering onlyAutomatic brush cutoff to advise maintenance schedule and to protect motorSpline type drive system for maximum powerFactory grease packed for reduced maintenance

The DeWalt D25850K is a Factory Reconditioned Heavy-Duty Spline Demolition Hammer Kit. The hammer kit features an 11.5 Amp motor that provides 1330 to 2660 BPM. The BPM and impact energy can be controlled by the variable-speed/impact controller and provide a range of 0.73 to 8 ft-lbs of impact energy per blow. The electronic variable speed also ensures that the proper amount of power is being delivered to the motor, providing outstanding chipping speed and allowing the user to control how fast he or she chips. Rubber grips help make job site applications easier and more comfortable.

The DeWalt D25551K is a Factory Reconditioned 1-9/16" Heavy-Duty Spline Rotary Hammer Kit. Its 360 side handle allows user the ability to position the side handle wherever it best suits the application. The tool has a modular construction allows service technicians to repair tools quickly for less down time. Bit Lock allows user to unwind jammed bits.

The factory reconditioned D25550K features an 11 Amp motor that provides 140 to 280 RPM and 1330 to 2660 BPM. The RPM and impact energy can be controlled by the variable-speed/impact controller and provide a range of 0.73 to 7.3 ft-lbs of impact energy per blow. The electronic variable speed also ensures that the proper amount of power is being delivered to the motor, providing outstanding drilling and chipping speed. The soft-start, two-position side-handle mounts and rubber grips help make job site applications easier and more comfortable. Clutches are found on all models. The hammer is 18-1/2 long and has a maximum solid bit size capacity of 1-9/16.

-Powerful 11.0 Amp MILWAUKEE Motor-Patented Vibration Isolation System Reduces operator fatigue and increases comfort and control - BOTH handles float to absorb hammering action-Electronic Feedback Control Circuit (EFCC) for reserve power (helps maintains speed, wont bog down)-Service Reminder Light Alerts user 8 hours in advance of auto shut-down for servicing-BOTH Grips Cushioned For Comfort-Speed Dial Allows User To Match Hammer Speed And Power To Application-Power Indicator Light-Internal Clutch Slips if Bit Jams-Two Operating Modes - Hammer with rotation and hammer only-Excellent Power To Weight Ratio-Sealed AC Only Switch keeps dust out, contacts clean-10 Quik-Lok

The Makita HP2050F is a Factory Reconditioned 3/4 inch Hammer Drill with L.E.D. Light. It features a built-in shock-proof, high output, white L.E.D. light which illuminates drilling edge and increases visibility with a bulb that never needs replacing throughout the life of the tool. A trusty positive stop locks into either mode which avoids slipping out of gear. The drill also features a large trigger switch and 360 swivel side handle for added comfort and adaptability. It has ergonomic and well balanced design with rubberized grip for comfort and control reducing operator fatigue. The air vent holes supply required ventilation while protecting motor from dust and dirt.

The Makita HR1830F is a Rotary Hammer Kit with LED Light. It is extremely compact and lightweight. The L.E.D. light illuminates drilling surface for more accurate work. The Rotary Hammer features a soft-grip side handle with elastomer for better comfort. It is ideal for overhead applications and working in confined areas.

Powerful 7.0 AMP motor and lightweight, 6.2 lbs.Lighter and more powerful than any hammer in its class2X faster drilling with synchronized RPM and BPMChisel Rotates 360 degrees with 40 different locking positions3-mode operation, rotation only, hammering with rotation, or hammering onlyPositive bit lock ensures that the bit is securely fastenedVariable speed for complete drilling and hammering control, reversibleOne-touch sliding chuck for easy bit changes, accepts SDS-Plus bitsBuilt-in torque limiter helps prevents kickback when hitting reinforcementsRecessed lock-on button for continuous useLarge trigger switch and 360 swivel side handle for added comfortErgonomic, well balanced design features a rubberized D-handle grip for greater stability, comfort and control with reduced operator fatiqueIdeal for anchor setters, sign hangers, installers, electricians, plumbers and masons

HP1621 Factory Reconditioned Hammer DrillPowerful 5.7 AMP motor (0 - 2,800 RPM), (0 - 44,800 BPM) for the most demanding jobs2-mode operation; "rotation only" and "hammering with rotation"Innovative forward/reverse change system for extended service life of carbon brush; Lock-on button for continuous operationLightweight (3.7 lbs.) with large capacity drilling up to 5/8" in concreteBall bearing construction for longer tool lifeLarge two-finger trigger switch with 360 swivel side handle for added maneuverabilityRubberized comfort grip for more comfort, control and reduced operator fatigueTrue variable speed for controlled start-upErgonomic in-line design9554NB Factory Reconditioned Angle GrinderSmall circumference barrel grip (only 2.5") for added comfortProtective zig-zig varnish seals motor from contaminants by forming a barrier under rotationLabyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of channels6.0 AMP motor design for high output power in a more compact tool (only 3.1 lbs).Thicker coil wires are wound more closely to reduce heat and energy lossAll ball bearing design and metal gear housing for durabilityRotatable gear housing rotates 90 for cutting applications

At 8.5 amps this heavy duty pistol grip Hammer-Drill can handle the toughest drilling of 3/4 inch holes in concrete. With dual range speed control, the operator can choose more power to speed for the toughest applications or more speed and less torque for lighter applications. Equipped with a metal gear case this tool can withstand the daily jobsite abuse. The removable side handle also assists in setting the depth rod for pre-set hole drilling.

Powerful 10 AMP motor delivers for the most demanding applicationsOne-touch sliding chuck for quick & easy bit changesDual mode operation Rotation with hammering and Hammering only make this toolSoft grip helps reduce the level of vibration felt by the end-userNo Hammering when idling increases the tool life and performance

DeWalt DW511 factory reconditioned heavy-duty 1/2 variable speed reversible single speed hammer drill. The DW511 1/2 hammer drill/drill provides versatility for wood, steel and masonry applications. The tool is equipped with a powerful 6.7 Amp motor for greater overload protection. Light weight (3.85 lbs) ensure minimal user fatigue. The variable-speed, two-finger rubber trigger increases comfort and control, as does the 360 side handle. The tool runs from 0 to 2700 RPM and 0 to 46000 BPM. It includes side handle, chuck key and depth rod.

-7.8 Amp motor provides high performance and overload protection -High/low speed for high speed drilling or high torque applications -Dual mode hammer drill/drill for wood, steel or masonry applications -Lightweight design for less user fatigue -Two-finger trigger for increased comfort -360 side handle with depth rod offers greater control, versatility and increased depth accuracy -Variable speed allows for precise hole placement on work surface

The Makita Reconditioned HP2070F is a 3/4-Inch Variable Speed Reversible Hammer Drill with L.E.D. Light. It has powerful 8.2 Amp motor for the most demanding jobs. It lights up the drilling surfaces with high output L.E.D. Power.

The Makita HP1621FK is a Factory Reconditioned 5/8 inch Hammer Drill. The rock-hard heavy-duty 5/8" hammer drill is exceptionally well-balanced and it quickly and efficiently transfers power to the drill bit with the lowest vibration. The innovative forward/reverse change system is for extended service life of carbon brush and the lock-on button for continuous operation.

Anti-Vibration Technology for increased end-user comfort3-mode operation: "rotation only", "hammering with rotation" and "hammering only" for multiple applicationsElectronic variable speed control allows user to set the speed based on the applicationOne-touch sliding chuck allows for quick bit changesBuilt-in Torque Limiter ensures stable torque control