Drill Attachments

Perfect for holding screws while driving for one-handed operation. The EZ Driver provides precise depth control while automatically releasing the screw. No risk to surfaces and easily used with flat head or rounded head screws. Accepts standard insert bit tips.

The Porter-Cable 511 is a Cylindrical Lock Boring Jig. The jig locates for 2-3/8-inch or 2-3/4-inch basket in seconds. It is easily adjustable for door thickness from 1-5/16 to 2-1/8 inches. All holes are drilled in one setup. It includes strike locator for accurate placement of jamb mortise.

Most of the time pocket holes can be placed on the backside or underside of a project where they are hidden from view. From time to time however, you may find the need to place one in a visible location. We make a variety of Plastic caps for use when concealing holes in laminated surfaces.

High impact plastic body, lubricated steel gearsFor right or left handed use90 degree atatchemnt allows you to drill in tight corners and at awkward anglesFor use with a cordless or electric drill1.1 gear ratio. 3/8 chuck.

The Delta 32-331 is a Stand for 32-325 or 32-326 Line Boring Machines. The stand is made of Steel construction with pre-drilled holes for easy mounting. Plastic feet provide stability. It is used for 32-325 or 32-326 Line Boring Machines.

ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool products-The FastFix angle chuck lets you work in a right angle from the axis. You can position it at any angle relative to the drill body - up, down, to the sides.

ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool products-The FastFix eccentric chuck offests the bit to the side of the chuck. This lets you drill and drive fasteners straight, even right up against sidewalls

ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Depth Stop works with an integral clutch that maintains the preset depth. This means the screw depth isnt controlled by a torque control, so all screws will be set to the same depth. With the Quick-out ring, screws can be removed with the flick of a wrist. Bit changes are fast and easy. The Depth Stop can be used with all Festool cordless drills and fits perfect into the FastFix chuck family.

The DeWalt DW2518 Rapid Load Holder Set allows for quick and easy accessory changes without rechucking. The DW2518 works with all 3/8 and 1/2 drills. The Rapid Load Holder has a hex shank to prevent slipping and has a pressure-activated ball-groove system for better retention so bits wont slip out. The DW2518 is easy and comfortable to use. It can be operated with one hand and has rubber grips for a better hold. The DW2518 comes with the most popular screwdriver bits, drivers, and drill bits for all of your needs.

The DeWalt DW2505 Rapid Load Holder allows for quick and easy accessory changes without rechucking. The DW2505 works with all 3/8 and 1/2 drills. The DW2505 Rapid Load Holder has a hex shank to prevent slipping and has a pressure-activated ball-groove system for better retention so bits wont slip out. The DW2505 is easy and comfortable to use. It can be operated with one hand and has rubber grips for a better hold.

The 1/4 round shank mandrel is used with 1/4 or larger chuck capacity and 9/16 to 1-3/16 hole saw. The primary application of a holesaw is to install pipe, copper tubing or PVC. The quick change mandrel features double set screws with a recessed combination head for quick and easy centering bit changes. It utilize hardened steel construction and have been tested through 15000+ cycles to deliver jobsite durability.

Easily converts 4270 mag press arbor to accept 1/2 inch diameter 6 inch long drill bits for the Milwaukee 48-66-2125This arbor assembly is for the 4270-21 Milwaukee Compact Electromagnetic Drill Press

This Milwaukee Hole Saw Arbor has a 3/8 inch hex shank for greater gripping capability in the chuck. It can be used in 3/8 inch capacity drills and larger. The arbor has a 1/2-20 thread and can be used on hole saws from 9/16 inch through 1-3/16 inch. It can be used with 49-56-8010 pilot bit which is supplied with this Arbor for use on wood and metal. One arbor and pilot per package.3/8 in. hex shank 1/2 in. - 20 threadStandard pilot 49-56-8010For Hole Saws 9/16 in. to 1-3/16 in. diameter

-Slotted screw heads -Screws are case hardened -Machined from alloy steel -Single piece packed in plastic bag

-Slotted screw heads-Screws are case hardened-Machined from alloy steel-Single piece packed in plastic bag

-Slotted screw heads-Screws are case hardened-Machined from alloy steel-Single piece packed in plastic bag

-Aluminum Oxide grain-2-ply cloth construction-Threaded male hub

The Milwaukee 49-22-1550 Large Drill Chuck Kit converts the Milwaukee 2404-1 Super Hole Shooter Drill from a no. 3 internal morse taper spindle to a 3/4" jawed chuck. The 49-22-1550 includes a 48-66-2000 Chuck and a 48-07-0100 Arbor.

The DeWalt DW0521 is a Heavy-Duty 3/8 inch Keyless Chuck for Impact Drivers. It features 1/4 inch hex quick connect which allows users to easily change from fastening to drilling. It has single sleeve design allows for single handed tightening. The keyless chuck is built with all-metal construction for maximum durability.

The Milwaukee 48-03-0006 is a 1/2 Quick Change Chuck. It can convert 3 jaw chuck into a 7/16 quick change chuck. It has 1/2 shank. This chuck allows rapid, keyless insertion and removal of 7/16 hex drive accessories.

This Milwaukee Hole Saw Arbor has a 7/16 inch hex shank for greater gripping capability in the chuck. The backing plate is equipped with push pins which lock into holes on the backing plate of the hole saw for positive efficient transmission of torque. It can be used in 1/2 inch capacity drills and larger. The arbor has a 5/8-18 thread and can be used on hole saws from 1-1/4 inch and larger. It can be used with 49-56-8000, 49-56-8002 and 49-56-8005 pilot bits. Pilot Bit 49-56-8000 is supplied with this Arbor for use on wood and metal. One arbor and pilot per package. 7/16 in. hex shank 5/8 in. - 18 thread Standard pilot 49-56-8000 For Hole Saws 1-1/4 in. diameter and larger

The Porter-Cable 43395PC 5/16 inch Diameter Arbor. The arbor is used to make slots for "T" molding and weather stripping.

All metal housing for greater durabilityEasily attaches to Makita and other brand 1/4 inch hex drive impact drivers

The Porter-Cable 42196PC is a 3-Wing Slot Cutter Arbor. The arbor is used to make slots for "T" molding and weather stripping.

The Performance W3939 is a 2-1/2" Drill Press Vise. The drill press vises feature sturdy construction and etched 2-1/2" jaws for a secure grip. The slotted mounting holes allow for quick easy vise alignment adjustments.

The Delta 20-622 is a 4 inch Quick Release Drill Press Vise that holds wood and metal work pieces up to 4 inch wide. Features quick-release trigger for instant release of work piece. Built-in groove holds dowels and other round materials. Thru-holes provided for mounting an auxiliary fence.

The Delta 17-940 is a 25-Piece Sanding Drum Kit. The Kit Converts the drill press for use as a spindle sander with these sanding drums. Five different drum sizes are included for sanding a variety of contour sizes. The drums can also be used in hand drills for freehand operations. This kit includes everything needed to get started, including two sets each of 80 and 120 grit sanding sleeves and a storage case. Fits any drill or drill press with a 1/4 inch or larger chuck.

The Porter-Cable 59381 is a Hinge Butt Template Kit. The hinge butt template is easy to operate and permits mortising of a door and jamb from 78 to 84 inches long. It assures perfect matching of hinge locations on door and jamb. The hinge template can be adjusted for cutting 3- to 6 inches mortises for common hinge sizes.

-High speed steel bits for quick inside cuts in plastic, plywood, and soft metals.-Chrome plated finish.-Use to drill holes for hinges in doors.-Sizes- 7/64, 19/64, 11/64.

Allows mortising of 3 inches, 3-1/2 inches and 4 inches hinges with square corners or 1/4 inches and 5/8 inches radius corners Works with 1-3/8 inches and 1-3/4 inches thick doors Includes mortising router bit with bearing guide Can be attached to a strip of wood in multiples for faster setup