Cordless Hammer Drills

The DeWalt DC984B is a 1/2 inch 14.4V Heavy-Duty XRP Cordless Hammerdrill/Drill/Driver - Tool Only. It uses a DeWalt built high-torque, high efficiency motor to deliver 450 in-lbs of torque for drilling large diameter holes and driving large screws. The XRP drill comes equipped with a patented 3-speed transmission. The 3-speed option allows the drill to be set at the optimum speed range for the application being performed to maximize performance. The DC984 has a maximum speed of 1800 RPM which is 29% faster than high speed. The Cordless Hammerdrill/Drill/Driver also has a maximum BPM speed of 30600 BPM which allows for high performance drilling in masonry applications.

The DeWalt DC935KA is a Factory Reconditioned 14.4V Heavy-Duty XRP 1/2 inch Cordless Hammerdrill/Drill/Driver Kit. with a high power, high efficiency motor to deliver 335 unit watts out of power for maximum performance in all drilling and fastening applications. The DC935KA XRP drill comes equipped with a patented 3-speed transmission. which allows the drill to be set to match the speed to the application for optimal performance. The DeWalt DC935KA drill/driver features an exclusive 1/2 inch axial locking chuck where the sleeve locks to prevent bits from slipping and falling out. The DC935KA is powered by an XRP extended run-time battery that gives the drill long run-time and battery life. This reconditioned DC935KA cordless drill offers superior ergonomics providing optimal balance, size and weight.

The factory reconditioned DeWalt DC926KA Cordless Hammer Drill symbolizes ergonomic perfection between balance, size and weight. This cordless power drill has a highly efficient motor that delivers 480 unit watts out of max power, and is housed in a remarkably lightweight (6 lbs.) body. The unique 3-speed transmission system of this reconditioned cordless drill, along with 22 clutch settings, gives its user full control over the tool and makes it versatile for different drilling and fastening applications.The heavy-duty

The Hitachi DV18DCL is a 1/2-Inch 18-Volt Lithium-Ion Hammer Drill. The Hitachi DV18DCL delivers a maximum torque of 380 in/lbs and has a 2-speed transmission with variable speed ranges from 0-400 in low and 0-1,500 in high. The hammer drill impact rate is 0-21,000bpm for even the toughest applications. A 22 stage slip clutch helps with all varies jobs along with tools balance.

Powered by an 18V XRP battery that is designed to perform 40% more than standard batteries, the DeWalt DC925KA factory reconditioned cordless hammerdrill/driver offers exceptional value. The power-packed motor of the DC925KA delivers maximum power of 480 unit watts out for all drilling, driving and fastening applications. The three-speed drilling transmission (0-450 RPM, 0-1,500 RPM, and 0-2,000 RPM) enables the user to easily drill 5/8 holes in 1/2 and 2/4 wafer boards or drill in otherwise tough to drill materials.The 3 speed options (0-7,650 BPM, 0-25,500 BPM, and 0-34,000 BPM) allow the DeWalt DC925KA to accomplish a variety of jobs including the tough job of making small holes. The

The DeWalt DC988 is a 18V 1/2 inch Heavy-Duty XRP Cordless Hammerdrill/Drill/Driver - Tool Only. The DeWalt built motor delivers 500 in-lbs of maximum torque. An exclusive 3-speed all metal transmission features a MAX 3rd Speed at 0-2000 RPM which is 38% faster than high speed. The hammer drill mode delivers 34000 BPM in MAX 3rd Speed drilling faster holes in masonry. The tool features an 1/2 inch ratcheting chuck lock with carbide jaws which prevent bits from slipping.

The DeWalt DC925K is an 18V Hammer Drill/Driver Tool Only with Case. It has a powerful 18V combination tool for heavy-duty hammerdrilling and screwdriving applications. There are three speed settings for optimum performance in high torque, normal use and high speed applications. In addition, the 22-position adjustable torque control allows for uniform results and optimized precision when screwdriving. You get superior bit-gripping strength with the 13 mm self-tightening chuck, which tightens throughout operation. You also get better control of the tool because of an electronic brake and the modular design,w hich gives you easy access to key components and serviceability. The high-performance fan-cooled motor is built for maximum power and durability with replaceable brushes. An all-around great tool with all the features youll need to get the job done right.

The 1/2" factory reconditioned Makita BHP451 is an 18V hammer-drill-driver kit built-in with LXT lithium-ion batteries, which double the battery life and provides 5x lower self-discharge. The tool features "Active 3" Control and a 45-minute Optimum charger that help in current, thermal, and voltage control. It is easy to switch your application from hammer drill to driver with just one touch - thanks to Shift-Lock technique. The 4-pole high torque motor delivers a maximum output of 560in-lbs.To optimize the efficiency by 25%, Makita BHP451 has an integrated 3-speed transmission. This feature of the Makita drill also adds to the versatility of the drill and all of these features are integrated in a compact body measuring just 9-7/8" in length, while weighing as light as 4.9lbs. The shape and the design of the cordless tool reduce the fatigue, even under pressure. Maintenance is easier as well, with the externally accessible brushes. The entire kit also includes two LED lights with the tool for accurate working in low light conditions.

The DeWalt DC925 is a Factory Reconditioned 18V Hammer Drill/Driver Tool Only. It is a powerful combination tool for heavy-duty hammerdrilling and screwdriving applications. There are three speed settings for optimum performance in high torque, normal use and high speed applications. In addition, the 22-position adjustable torque control allows for uniform results and optimized precision when screwdriving. You get superior bit-gripping strength with the 13 mm self-tightening chuck, which tightens throughout operation. You also get better control of the tool because of an electronic brake and the modular design, which gives you easy access to key components and serviceability. The high-performance fan-cooled motor is built for maximum power and durability with replaceable brushes. An all-around great tool with all the features youll need to get the job done right.

The DC927 is a 18V hammer drill/driver with NANO Technology- Tool Only. It is powered by a combination of a high-efficiency DeWalt-built motor and exclusive 18V nano-phosphate lithium ion battery. The combination delivers 425 UWO of maximum power and the runtime of 18V, but at 5.5 lbs weighs almost a pound less than traditional 18V hammer drills. The DC927 comes equipped with a patented 3-speed, all-metal transmission that helps to match the tools speed to the application. It also features an exclusive 1/2 inch, self-tightening chuck that tightens during work, for impressive bit-gripping torque reducing bit slippage or fall out. The hammer drills superior ergonomics are styled to optimize performance with balance, size and weight. The hammer drill/driver has three speed settings 0-450 RPM, 0-1500 RPM and 0-1800 RPM and it allows for three hammer drilling speeds, too 0-7650 BPM, 0-25500 BPM and 0-30600 BPM. It also offers 22 clutch settings for increased control in fastening applications.

The Milwaukee 0824-24 V18

The DeWalt Factory Reconditioned DC212KA is a Heavy-Duty 18V Cordless 7/8" SDS Hammer. The SDS hammer features electro-pneumatic hammer mechanism for fast penetration and low vibration. Its compact L-Shape design allows access in tight spaces while providing optimal balance for the user. The hammer has 360 side handle for better control and ease of use in tight spaces. Its shocks has active vibration control which significantly reduces vibration and increases user comfort and productivity.

The DeWalt DC925B is an 18V Cordless Hammerdrill/Drill/Driver Tool Only. It has DeWalt built high power, high efficiency motor which delivers 510 unit watts out of power for maximum performance in all drilling and fastening applications. Its XRP extended run-time batteries provide long run-time & battery life (Batteries not Included). Patented 3-speed all-metal transmission matches the speed to the application for optimal performance. Heavy-duty 1/2 inch self-tightening chuck tightens throughout operation providing superior bit gripping torque. It has superior ergonomics optimize balance, size and weight.

The Makita Reconditioned BHR240Z is an 18-Volt LXT Lithium-Ion SDS-Plus Rotary Hammer Tool Only. It has 3-mode switch for rotation only, hammering with rotation or hammering only. The Makita BHR240Z features 2x faster drilling with synchronized RPM and BPM for more efficient drilling. The built-in torque limiter clutch disengages if bit jams when hitting rebar. The chisel rotates 360 with 40 different positions to get the best working. The The Makita BHR240Zs LXT Lithium-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power).Batteries and Charger are NOT Included.

The Makita BTP140Z is a 18V LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill Kit Tool Only. The Makita BTP140Z hybrid 4-function tool drives lag bolts, drills into concrete, drives screws with clutch settings and drills into wood, metal and plastic. The Makita built, 4-pole maximum torque motor delivers 1240 in-lbs of efficient torque in a compact size. The Makita BTP140Zs LXT Lithium-Ion battery provides longer run time, 5x lower self-discharge is for use any time and 16 firm holding contact terminals are for constant high power.

The DC927KL is a 18V hammer drill/driver with NANO Technology. It is powered by a combination of a high-efficiency DEWALT-built motor and exclusive 18V nano-phosphate lithium ion battery. The combination delivers 425 UWO of maximum power and the runtime of 18V, but at 5.5 lbs weighs almost a pound less than traditional 18V hammer drills. The DC927KL comes equipped with a patented 3-speed, all-metal transmission that helps to match the tools speed to the application. It also features an exclusive 1/2 inch, self-tightening chuck that tightens during work, for impressive bit-gripping torque reducing bit slippage or fall out. The hammer drills superior ergonomics are styled to optimize performance with balance, size and weight. The hammer drill/driver has three speed settings 0-450 RPM, 0-1500 RPM and 0-1800 RPM and it allows for three hammer drilling speeds, too 0-7650 BPM, 0-25500 BPM and 0-30600 BPM. It also offers 22 clutch settings for increased control in fastening applications.

DEWALT built high torque motor delivers 500 in.-lbs. of maximum torqueXRP

The Milwaukee 0627-84E is a Factory Reconditioned 18-Volt 1/2-Inch Cordless Hammer Drill Kit. The rugged Lok-Tor series drill delivers high torque, long run-time and the increased durability and quality. It features an exclusive all-metal, single-sleeve ratcheting chuck with carbide jaws to provide high grip torque on bits. A new Milwaukee-built high efficiency motor delivers up to 495 in-lbs of torque. The high efficiency motor and superior battery technology combine to provide the ultimate run-time.We at Tool King are excited to present this kit for the first time with a 220V European charger for our international customers.

The DeWalt DC988KA is a Factory Reconditioned 18V 1/2 inch Heavy-Duty XRP Cordless Hammerdrill/Drill Kit . It uses a DeWalt built high-torque, high efficiency motor to deliver 500 in-lbs of torque for drilling large diameter holes and driving large screws. The XRP drill comes equipped with a patented 3-speed transmission. The 3-speed option allows the drill to be set at the optimum speed range to maximize performance. The DC988 has a maximum speed of 2000 RPM which is 38% faster than high speed. This unit has a maximum BPM speed of 34000 BPM which allows for high performance drilling in masonry applications.

The DeWalt DC910B is a Cordless 1/2-Inch 28-Volt Hammerdrill/Drill/Driver With NANO Technology. With the power of 28 Volts the DC310BK is light enough for all day use and has enough power to handle any work site job. With the standard features expected from DeWalt

The DeWalt DC233KL is a Heavy-Duty 36V Cordless 1 inch SDS Rotary Hammer Kit With NANO Technology. It features SHOCKS- Active Vibration Control which significantly reduces vibration and increases user comfort and productivity. The compact L-shape design allows access in tight spaces while providing optimal balance to the user. The 2.0 ft-lbs impact energy provides corded power without the cord. DeWalt built high torque; high efficiency motor delivers maximum performance in all drilling applications.

The Milwaukee 0724 is a 28V 1/2 Cordless Hammer-Drill. It uses the Milwaukee built high power motor to develop an 600 in-lbs of maximum torque and 0-600 RPM, 0-1800 RPM, ideal for drilling larger holes and driving larger screws faster. The 28V battery pack weighs less than an 18 Volt pack and yet delivers twice the run-time. The 0724 comes standard with a 1/2 all-metal, single-sleeve, ratcheting chuck with all carbide jaws that keeps bits from falling out and drill bits from slipping. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. The 0724 also comes standard with the patented Clip-Lok System. The Clip-Lok System keeps the drill within arms length at all times. The Clip-Lok System also features an on-board bit holder which holds up to two standard Phillips bits.

-Up to 2x Run-time of 18v tools-Lightweight - 28V Power with 18v battery weight-28V High power reversiable motor (screw removal; bit jams)-Keyless chuck for fast, easy accessory and adapter changes-Tri-mode - Hammer drilling, chiseling and drilling modes-Durable metal gearbox for long life-Soft grip handle and two-finger trigger for optimal operator comfort-Compact L-Shape handle design for maximum comfort and control, better access to tight spaces-Battery Fuel Gauge - Displays remaining run-rime

-Milwaukee 0724 Cordless 28 Volt 1/2 inch Hammer-Drill uses the Milwaukee built high power motor to develop an enormous 600 in/ lbs of maximum torque and 0-600/0-1800 rpm, ideal for drilling larger holes and driving larger screws faster! Powering the 0724 is the revolutionary 28 Volt Lithium-Ion battery pack exclusively from Milwaukee. The 28 Volt battery pack weighs less than an 18 Volt pack yet delivers two times the run-time, making this the ideal solution for all drilling and driving needs! Only the Milwaukee battery can be inserted in the reverse position which allows for the ultimate balance when working overhead or in hard to reach areas. The 0724 comes standard with a 1/2 inch all-metal, single-sleeve, ratcheting chuck with all carbide jaws that keeps bits from falling out and drill bits from slipping! This is the industrys tightest gripping chuck and comes standard only on the 0724. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. The 0724 also comes standard with the patented Clip-Lok System. The Clip-Lok System attaches securely to the operators belt or tool bags and easily releases with one hand, ideal when working from a ladder or when there is nowhere to place the tool when adjusting or positioning a work piece. The Clip-Lok System keeps the drill within arms length at all times. The Clip-Lok System also features an on-board bit holder which holds up to two standard Phillips bits. Tool only (no battery or charger) Clip-Lok System Side Handle No. 2 Phillips Bit

Milwaukee 0756-22 is a 1 inch 28V Compact SDS Rotary Hammer Kit. This is a powerful, compact design, lightweight and extremely versatile tool. Powered by a V28 Lithium-Ion Battery, the 0756 delivers maximum run time and true corded power in a cordless rotary hammer. With three operating modes it can easily be switched from rotary hammer to rotation only (drill) to hammer only (chipping). The 0756 delivers 2.1 ft-lbs of impact energy and 4700 BPM at up to 1400 RPM for fast drilling and powerful chipping. The optimal drilling range in concrete is from 3/16 inch to 3/4 inch with a 1 inch solid bit capacity and 2-1/2 inch thin wall core bit capacity.